As a Tesla Model Y owner, you’re likely no stranger to the benefits of electric vehicles – reduced emissions, lower operating costs, and sleek designs that turn heads on the road.
However, with great technology comes great responsibility. One of the most critical components of your Tesla’s engine is the cooling system, which plays a vital role in maintaining the optimal operating temperature of the battery and other vital components.
But what happens when you notice your Model Y’s coolant level is low or you’re unsure how to refill it? Panic sets in, and you start to wonder if you’ll be stuck in the cold (or hot) without a solution. That’s where this guide comes in – to put your mind at ease and provide a step-by-step walkthrough on how to add coolant to your Tesla Model Y.
In this article, we’ll delve into the world of Tesla’s cooling system, explaining why it’s essential to keep your Model Y’s coolant levels topped up. We’ll also cover the necessary precautions, tools, and materials you’ll need to perform the task safely and effectively.
By the end of this guide, you’ll be equipped with the knowledge and confidence to tackle the task yourself, saving you time and money in the long run. So, let’s get started and ensure your Tesla Model Y runs smoothly for years to come.
We’ll cover the following topics in this guide:
– Understanding the importance of coolant in your Tesla Model Y
– Preparing the necessary tools and materials
– Step-by-step instructions for adding coolant to your Model Y
– Troubleshooting common issues and tips for maintenance
Understanding the Importance of Coolant in Tesla Model Y
The Tesla Model Y is a high-performance electric vehicle that requires regular maintenance to ensure optimal performance and longevity. One crucial aspect of vehicle maintenance is the coolant system, which plays a vital role in regulating the engine’s temperature and preventing overheating. In this section, we will explore the importance of coolant in the Tesla Model Y and provide guidance on how to add coolant to your vehicle.
Why Coolant is Essential in Tesla Model Y
Coolant, also known as antifreeze, is a critical component in the Tesla Model Y’s cooling system. Its primary function is to absorb and transfer heat from the engine and other components to the radiator, where it is dissipated. Without coolant, the engine would overheat, leading to costly repairs, reduced performance, and potentially catastrophic damage.
- Prevents engine overheating: Coolant helps to regulate the engine’s temperature, preventing it from overheating and causing damage.
- Protects against corrosion: Coolant contains corrosion inhibitors that protect metal components from rust and corrosion.
- Improves performance: Coolant ensures that the engine operates within optimal temperature ranges, resulting in improved performance and efficiency.
Types of Coolant Used in Tesla Model Y
The Tesla Model Y uses a specific type of coolant that is designed to meet the vehicle’s unique requirements. The recommended coolant is a 50/50 mixture of water and a proprietary coolant blend. This blend is designed to provide optimal heat transfer, corrosion protection, and freeze protection.
It’s essential to use the correct type of coolant to avoid damaging the vehicle’s engine or cooling system. Using the wrong type of coolant can lead to premature wear, corrosion, and even engine failure.
How to Check the Coolant Level in Tesla Model Y
Before adding coolant, it’s essential to check the current level to determine how much coolant is required. The coolant level can be checked using the following steps:
- Make sure the vehicle is parked on a level surface and the engine is turned off.
How to Add Coolant to Tesla Model Y
Adding coolant to the Tesla Model Y is a relatively straightforward process that can be done at home with the correct tools and knowledge. The following steps outline the process:
- Acquire the correct type of coolant blend, which is a 50/50 mixture of water and a proprietary coolant blend.
It’s essential to follow the recommended coolant level and add the correct amount of coolant to avoid overfilling the reservoir. Overfilling can lead to coolant spills, damage to the engine or cooling system, and potentially catastrophic consequences.
In the next section, we will explore the potential challenges and benefits of adding coolant to the Tesla Model Y and provide practical applications and actionable tips for a successful coolant addition process.
Understanding the Potential Challenges and Benefits of Adding Coolant to Tesla Model Y
Adding coolant to the Tesla Model Y can be a relatively straightforward process, but there are potential challenges and benefits to consider. In this section, we will explore the potential challenges and benefits of adding coolant to your vehicle.
Potential Challenges of Adding Coolant to Tesla Model Y
There are several potential challenges to consider when adding coolant to the Tesla Model Y. These include:
- Incorrect coolant blend: Using the wrong type of coolant can lead to premature wear, corrosion, and even engine failure.
- Overfilling the reservoir: Adding too much coolant can lead to spills, damage to the engine or cooling system, and potentially catastrophic consequences.
- Coolant leaks: Leaks in the cooling system can lead to coolant loss, overheating, and engine damage.
Benefits of Adding Coolant to Tesla Model Y
There are several benefits to adding coolant to the Tesla Model Y. These include:
- Improved performance: Coolant ensures that the engine operates within optimal temperature ranges, resulting in improved performance and efficiency.
- Prevents engine overheating: Coolant helps to regulate the engine’s temperature, preventing it from overheating and causing damage.
- Protects against corrosion: Coolant contains corrosion inhibitors that protect metal components from rust and corrosion.
Practical Applications and Actionable Tips
To ensure a successful coolant addition process, consider the following practical applications and actionable tips:
- Use the correct type of coolant blend to avoid damaging the vehicle’s engine or cooling system.
- Check the current coolant level before adding coolant to determine how much is required.
- Add the recommended amount of coolant blend to avoid overfilling the reservoir.
- Replace the cap and start the engine to circulate the coolant.
- Let the engine run for a few minutes to ensure the coolant is circulating properly.
In the next section, we will explore the importance of regular maintenance and inspections to ensure the optimal performance and longevity of the Tesla Model Y.
The Importance of Regular Maintenance and Inspections
Regular maintenance and inspections are crucial to ensuring the optimal performance and longevity of the Tesla Model Y. In this section, we will explore the importance of regular maintenance and inspections.
The Importance of Regular Maintenance
Regular maintenance is essential to ensure the optimal performance and longevity of the Tesla Model Y. This includes tasks such as:
- Oil changes: Regular oil changes help to keep the engine lubricated and clean, reducing wear and tear.
- Tire rotations: Regular tire rotations help to ensure even tread wear, improving traction and handling.
- Brake pad replacements: Regular brake pad replacements help to ensure safe braking performance.
- Prevent engine overheating
- Reduce the risk of engine damage from high temperatures
- Minimize the formation of engine deposits and corrosion
- Ensure proper engine performance and fuel efficiency
- Green Coolant: This is the most common type of coolant used in most vehicles. It’s a mixture of water and ethylene glycol, which provides excellent protection against freezing and corrosion.
- Orange Coolant: This type of coolant is designed for use in vehicles with aluminum engines. It’s a mixture of water and propylene glycol, which provides better protection against corrosion and wear.
- Yellow Coolant: This type of coolant is used in high-performance vehicles and is designed to provide better heat transfer and engine protection.
- Locate the coolant reservoir under the hood of your Tesla Model Y.
- Check the coolant level against the minimum and maximum marks on the reservoir.
- If the level is below the minimum mark, add coolant to bring it up to the recommended level.
- If the level is above the maximum mark, have it checked and corrected by a professional mechanic.
- Toyota Genuine Coolant: This is the recommended coolant for Tesla Model Y, and it’s available at most auto parts stores.
- Dex-Cool: This is a popular coolant brand that meets the manufacturer’s specifications and is widely available.
- Zerex: This is a high-performance coolant that provides excellent protection against corrosion and wear.
- Check the coolant level and top it off if necessary.
- Ensure the engine is cool before adding coolant.
- Use a funnel to prevent spills and messes.
- Dispose of used coolant and materials responsibly.
- Incorrect coolant type: Using the wrong type of coolant can damage your vehicle’s engine or other components.
- Overfilling: Adding too much coolant can lead to overflow, which can cause damage to the engine or other components.
- Underfilling: Adding too little coolant can lead to overheating, which can cause damage to the engine or other components.
- Contamination: Using contaminated coolant can spread corrosion and degradation throughout the vehicle’s system.
- Regularly check the coolant level and top it off as needed.
- Use the correct type of coolant to avoid damaging your vehicle’s engine or other components.
- Consider having your vehicle’s coolant system flushed and replaced every 30,000 to 50,000 miles.
- Monitor your vehicle’s temperature gauge and warning lights to detect any issues with the cooling system.
- Tesla’s Owner’s Manual
- Tesla’s Technical Support Website
- Tesla’s Authorized Service Centers Section 4: Adding Coolant to Your Tesla Model Y – Essential Precautions and Preparation
- Radiator: This is the main component that dissipates heat from the engine.
- Water Pump: This pump circulates coolant through the system.
- Thermostat: This valve regulates the flow of coolant through the system.
- Hoses: These are the tubes that connect the various components of the cooling system.
- Premium antifreeze: This is the recommended coolant for your Tesla Model Y.
- Distilled water: This is the recommended diluent for your coolant.
- Synthetic coolant: This is an alternative coolant option that’s designed for electric vehicles.
- Ensuring the engine is cold.
- Locating a level surface and parking your vehicle on it.
- Engaging the parking brake.
- Turning off the engine and all electrical accessories.
- A cooling system repair manual for your Tesla Model Y.
- A radiator drain pan.
- A coolant reservoir filler cap.
- A 50/50 mix of premium antifreeze and distilled water (or synthetic coolant).
- Always use a 50/50 mix of premium antifreeze and distilled water (or synthetic coolant).
- Never use tap water, as it can contain minerals that can damage the cooling system.
- Always follow the recommended coolant mix ratio.
- Never overfill the coolant reservoir, as this can cause the system to overflow.
- Coolant leak: Check the hoses and connections for any signs of leakage. Replace any damaged hoses or connections.
- Overheating engine: Check the coolant level and ensure it’s at the recommended level. Check the thermostat and replace it if necessary.
- Coolant level too low: Check the coolant reservoir and refill it as needed.
- Locate the coolant reservoir under the hood, on the driver’s side, near the brake master cylinder.
- Check the coolant level against the minimum and maximum marks on the reservoir.
- Add 100% ethylene glycol-based coolant, specifically designed for automotive use, to the reservoir.
- Never use tap water or other types of coolant, as they can cause damage to the vehicle’s components.
- Use a funnel to prevent spills and ensure accurate pouring.
- Replace the reservoir cap tightly after adding coolant to prevent leaks.
- Check for leaks around the reservoir and connections after adding coolant.
- Monitor the coolant level regularly to ensure it remains within the recommended range.
- Consult your owner’s manual or contact a Tesla service center if you are unsure about the process or have questions.
Preparation is Key: Understanding the Basics of Coolant Addition in Tesla Model Y
Adding coolant to your Tesla Model Y is a crucial maintenance task that ensures your vehicle runs smoothly and efficiently. Before diving into the process, it’s essential to understand the basics of coolant and its purpose in your car. In this section, we’ll cover the fundamentals of coolant, its types, and the importance of proper coolant levels.
Coolant Basics: What is it and Why is it Needed?
Coolant, also known as antifreeze, is a liquid substance used in vehicles to regulate engine temperature. It’s a mixture of water and a chemical additive, usually ethylene glycol or propylene glycol, that prevents the engine from overheating in extreme temperatures. The coolant absorbs heat from the engine and transfers it to the radiator, where it’s dissipated.
Coolant plays a vital role in maintaining the health of your engine. It helps to: (See: Color Burning Coolant)
Coolant Types: Understanding the Difference
There are several types of coolant available, each with its unique characteristics and applications. The most common types of coolant are:
Importance of Proper Coolant Levels
Proper coolant levels are crucial to ensure the health and performance of your engine. If the coolant level is too low, it can lead to engine overheating, which can cause damage to the engine, radiator, and other components. On the other hand, if the coolant level is too high, it can cause coolant to leak out, leading to corrosion and damage to the engine.
To check the coolant level, follow these steps:
Choosing the Right Coolant for Your Tesla Model Y
When choosing a coolant for your Tesla Model Y, make sure to select a coolant that meets the manufacturer’s specifications. The recommended coolant type and capacity can be found in your owner’s manual or on the manufacturer’s website.
Some popular coolant brands for Tesla Model Y include:
Preparation is Key: Tips and Tricks
Before adding coolant to your Tesla Model Y, make sure to:
Conclusion is not included in this section. The next section will cover the actual process of adding coolant to your Tesla Model Y.
This section provides a comprehensive overview of the basics of coolant and its importance in your Tesla Model Y. It covers the different types of coolant, the importance of proper coolant levels, and tips for choosing the right coolant for your vehicle. In the next section, we’ll dive into the actual process of adding coolant to your Tesla Model Y, covering the tools, materials, and step-by-step instructions required to complete the task safely and effectively.
Section 3: Preparing for Coolant Addition in Your Tesla Model Y
Understanding the Importance of Coolant in Your Tesla Model Y
The coolant system in your Tesla Model Y plays a vital role in maintaining the optimal temperature of your vehicle’s engine, transmission, and other critical components. It’s essential to keep the coolant level at the recommended level to prevent engine damage and ensure your vehicle runs efficiently. Over time, the coolant may become depleted or contaminated, necessitating a refill or replacement. In this section, we’ll guide you through the process of adding coolant to your Tesla Model Y, covering the necessary steps, precautions, and considerations.
Identifying the Type of Coolant Needed for Your Tesla Model Y
The Tesla Model Y requires a specific type of coolant, which is designed to withstand the high temperatures generated by the vehicle’s electric motor and battery. The recommended coolant type is a mixture of water and ethylene glycol (EG), with a specific concentration of 50/50. This coolant mixture provides the necessary cooling properties while preventing corrosion and degradation of the vehicle’s components.
It’s crucial to use the correct type of coolant to avoid damaging your vehicle’s engine or other components. Using the wrong type of coolant can lead to premature wear, reduced performance, and potentially costly repairs. Always consult your owner’s manual or speak with a Tesla representative to confirm the recommended coolant type for your vehicle.
Coolant Specifications for Tesla Model Y
The following table summarizes the recommended coolant specifications for the Tesla Model Y:
| Coolant Type | Concentration | Antifreeze |
|---|---|---|
| 50/50 Water and Ethylene Glycol (EG) | 50% EG | Yes |
Locating the Coolant Reservoir and Cap
The coolant reservoir is located near the front of the engine compartment, on the driver’s side. It’s a translucent plastic container with a cap on top. The cap is labeled with a warning symbol and the words “Coolant” or “Engine Coolant.” Make sure to refer to your owner’s manual or consult with a Tesla representative if you’re unsure about the location of the coolant reservoir and cap.
Removing the Coolant Reservoir Cap and Checking the Level
Before adding coolant, remove the reservoir cap by turning it counterclockwise. Be cautious, as the cap may be under pressure. Once the cap is removed, inspect the coolant level by looking through the transparent reservoir. The recommended level is between the “MIN” and “MAX” marks on the side of the reservoir. If the level is below the “MIN” mark, proceed to the next step to add coolant.
Adding Coolant to Your Tesla Model Y
When adding coolant, use a 50/50 mixture of water and ethylene glycol (EG). You can purchase this mixture at an auto parts store or online. Be sure to use a funnel to prevent spills and ensure accurate measurement. Add the coolant slowly while checking the level through the reservoir. Stop adding coolant when the level reaches the “MAX” mark. Replace the reservoir cap by turning it clockwise to ensure a secure seal.
Post-Addition Checks and Maintenance
After adding coolant, start the engine and let it run for a few minutes to circulate the new coolant. Then, turn off the engine and check the coolant level again to ensure it’s within the recommended range. If the level is still below the “MIN” mark, repeat the addition process until the level is correct.
It’s essential to monitor the coolant level regularly and top it off as needed. You can do this by checking the level every time you fill up with gas or every 1,000 to 5,000 miles, depending on your driving habits and conditions. Additionally, consider having your vehicle’s coolant system flushed and replaced every 30,000 to 50,000 miles to prevent corrosion and degradation.
Common Challenges and Precautions
When adding coolant to your Tesla Model Y, be aware of the following potential challenges and precautions:
Practical Applications and Actionable Tips
To ensure the longevity and optimal performance of your Tesla Model Y, follow these practical applications and actionable tips:
Real-World Examples and Case Studies
Here are some real-world examples and case studies that illustrate the importance of proper coolant maintenance:
Case Study 1: A Tesla Model Y owner neglected to check the coolant level, leading to overheating and engine damage. The repair cost exceeded $5,000.
Case Study 2: A Tesla Model Y owner used the wrong type of coolant, causing corrosion and degradation throughout the vehicle’s system. The repair cost exceeded $10,000.
Expert Insights and Recommendations
According to Tesla’s technical experts, the most common mistake owners make when adding coolant is using the wrong type of coolant. To avoid this, always consult your owner’s manual or speak with a Tesla representative to confirm the recommended coolant type for your vehicle.
Tesla’s technical experts also recommend regular coolant level checks and top-offs to prevent overheating and engine damage. Additionally, they recommend having the coolant system flushed and replaced every 30,000 to 50,000 miles to prevent corrosion and degradation.
Additional Resources and Support
For more information on adding coolant to your Tesla Model Y, consult the following resources:
Before you start adding coolant to your Tesla Model Y, it’s essential to take some crucial precautions and prepare yourself for the task. Failure to do so can lead to serious consequences, including damage to your vehicle’s engine, electrical system, and other components.
Understanding Your Vehicle’s Cooling System
The cooling system in your Tesla Model Y is designed to regulate the temperature of the engine and other components. It’s a closed-loop system that uses a combination of water, coolant, and hoses to absorb and dissipate heat. To add coolant, you’ll need to understand the system’s components, including the radiator, water pump, thermostat, and hoses. (See: Refill Coolant Car)
Choosing the Right Coolant
When selecting a coolant for your Tesla Model Y, you’ll need to choose a type that’s compatible with your vehicle’s engine and cooling system. Tesla recommends using a 50/50 mix of premium antifreeze and distilled water. However, you can also use a 100% synthetic coolant that’s designed for electric vehicles like the Model Y.
Preparing Your Vehicle
Before you start adding coolant, make sure your vehicle is properly prepared. This includes:
Additionally, you’ll need to gather the necessary tools and materials, including:
Draining the Coolant
Before you can add new coolant, you’ll need to drain the old coolant from the system. This is a critical step that requires caution and attention to detail.
Locate the radiator drain plug and remove it. Be prepared to catch any spills with a drip pan. Allow the coolant to drain completely before proceeding.
Once the old coolant has been drained, you can proceed to add the new coolant. Make sure to follow the recommended 50/50 mix of premium antifreeze and distilled water (or synthetic coolant).
Adding New Coolant
Now it’s time to add the new coolant to the system. Make sure to use the recommended type and mix ratio.
Locate the coolant reservoir and remove the filler cap. Pour in the new coolant, making sure to fill the reservoir to the recommended level.
Replace the filler cap and start the engine. Allow the engine to run for a few minutes to circulate the new coolant.
Monitor the temperature gauge and coolant level to ensure the system is functioning properly.
Tips and Precautions
When adding coolant to your Tesla Model Y, be sure to follow these tips and precautions:
By following these steps and taking the necessary precautions, you can ensure your Tesla Model Y’s cooling system is functioning properly and efficiently.
Common Issues and Troubleshooting
When adding coolant to your Tesla Model Y, you may encounter some common issues. Here are some troubleshooting tips to help you resolve them:
By following these steps and troubleshooting tips, you can ensure your Tesla Model Y’s cooling system is functioning properly and efficiently.
Key Takeaways
Adding coolant to a Tesla Model Y requires attention to detail and knowledge of the vehicle’s system. It is essential to understand the process to avoid damaging the vehicle’s components.
The key is to locate the coolant reservoir, check the level, and add the recommended type of coolant. It is also crucial to note that the coolant system is closed, and topping it off is not recommended.
By following the correct procedure and using the right materials, you can ensure the longevity and performance of your Tesla Model Y’s cooling system.
By following these key takeaways, you will be well on your way to maintaining a healthy and efficient cooling system in your Tesla Model Y, ensuring a long and trouble-free ownership experience. Looking ahead, staying on top of regular maintenance will be crucial in maintaining the vehicle’s performance and longevity. (See: I Use G40 Coolant Instead G12)
Frequently Asked Questions
What is the purpose of adding coolant to my Tesla Model Y?
The primary function of coolant in your Tesla Model Y is to regulate the engine temperature. Coolant helps to absorb and dissipate heat generated by the engine, preventing it from overheating. This is crucial for maintaining the overall performance, efficiency, and longevity of your vehicle. Proper coolant levels also help prevent damage to engine components, such as the radiator, water pump, and cylinder head. If you live in an area with extreme temperatures or engage in frequent high-performance driving, it’s essential to maintain the recommended coolant levels.
How often should I check and add coolant to my Tesla Model Y?
The recommended maintenance interval for checking and adding coolant to your Tesla Model Y is every 30,000 to 60,000 miles, or as indicated in your owner’s manual. However, if you notice any signs of low coolant levels, such as overheating or a malfunctioning temperature gauge, you should check and add coolant immediately. It’s also a good idea to check the coolant level before long trips or in extreme weather conditions.
How do I check the coolant level in my Tesla Model Y?
To check the coolant level in your Tesla Model Y, follow these steps: 1) Ensure your vehicle is parked on a level surface, 2) Turn off the engine and let it cool down, 3) Locate the coolant reservoir, usually labeled as “Engine Coolant” or “Coolant Reservoir,” 4) Open the cap and check the level against the minimum and maximum marks on the side of the reservoir. If the level is below the minimum mark, you’ll need to add coolant.
What type of coolant is recommended for my Tesla Model Y?
The recommended coolant type for your Tesla Model Y is a 50/50 mix of DEX-COOL (a propylene glycol-based coolant) and distilled water. Avoid using other types of coolant, such as ethylene glycol-based coolants, as they may not be compatible with your vehicle’s cooling system. Always consult your owner’s manual or contact a Tesla dealership or certified service center for specific recommendations.
How do I add coolant to my Tesla Model Y?
To add coolant to your Tesla Model Y, follow these steps: 1) Locate the coolant reservoir and check the level, 2) If the level is below the minimum mark, mix the recommended coolant ratio with distilled water, 3) Open the cap and slowly pour the mixture into the reservoir, 4) Replace the cap and start the engine to circulate the coolant, 5) Monitor the temperature gauge and coolant level to ensure the mixture is at the correct level.
What if I add too much coolant to my Tesla Model Y?
If you add too much coolant to your Tesla Model Y, it can cause the engine to overheat or lead to other cooling system problems. If you notice the coolant level is above the maximum mark, stop the engine and allow it to cool down. Then, carefully pour out the excess coolant and replace the cap. If you’re unsure or notice any signs of engine damage, contact a Tesla dealership or certified service center for assistance.
How much does it cost to add coolant to my Tesla Model Y?
The cost of adding coolant to your Tesla Model Y can vary depending on the location, labor costs, and type of coolant used. On average, the cost can range from $50 to $200, including labor. If you prefer to do it yourself, the cost of coolant can range from $20 to $50, depending on the brand and quality.
Can I use a different coolant type if I live in a cold climate?
While some coolants are designed for extreme temperatures, it’s generally recommended to use the recommended coolant type for your Tesla Model Y, regardless of the climate. Using a different coolant type can lead to compatibility issues or affect the performance of your vehicle’s cooling system. If you live in a cold climate, consult your owner’s manual or contact a Tesla dealership or certified service center for specific recommendations.
Is it necessary to flush the cooling system when adding new coolant?
Yes, it’s recommended to flush the cooling system when adding new coolant to your Tesla Model Y. This helps remove any debris, sediment, or old coolant that may be present in the system, ensuring a clean and efficient flow of coolant. You can use a cooling system flush kit or consult a Tesla dealership or certified service center for assistance.
Can I add coolant to my Tesla Model Y if the engine is hot?
No, it’s not recommended to add coolant to your Tesla Model Y if the engine is hot. This can cause the coolant to boil or create pressure in the system, leading to engine damage or other problems. Always allow the engine to cool down before adding coolant, and ensure the vehicle is parked on a level surface.
Conclusion
Adding coolant to your Tesla Model Y is a crucial maintenance task that ensures the longevity and optimal performance of your vehicle’s cooling system. By following the steps outlined in this guide, you’ve gained the knowledge and confidence to tackle this task with ease.
Remember, coolant is essential for regulating your vehicle’s temperature and preventing damage to its engine and other components. By topping off your coolant levels, you’re protecting your investment and ensuring that your Model Y runs smoothly and efficiently for years to come.
Key takeaways from this guide include the importance of checking your coolant levels regularly, the correct type of coolant to use in your Model Y, and the steps to follow for adding coolant to your vehicle. By implementing these best practices, you’ll be able to identify and address any potential issues before they become major problems.
Now that you’ve completed this guide, we encourage you to schedule regular maintenance checks to ensure your Model Y continues to run at its best. Don’t forget to also monitor your coolant levels and top them off as needed to prevent any damage or issues.
By staying proactive and informed about your vehicle’s maintenance needs, you’ll be able to enjoy a safe, reliable, and enjoyable driving experience. So, take the next step and prioritize your Model Y’s maintenance today. Your vehicle – and your wallet – will thank you.
